How to assemble bicycle wheels
1.Place rim on pre-assemble support tool ( if you are an individual user do not need this tool.
2. Place hub on pre-assemble support tool.
3.Put some grease on head of spoke.
4.Insert the first 10 spokes (This is 20holes front hub) through upper hub holes. Remember to put some grease on each spoke head.
5.Insert an spoke from inside rim spoke hole to outside rim spoke hole.
6. Thread a nipple on end side spoke.
7.Place nipple on inside rim hole.
8.Place nipple tool on outside hole to avoid loose nipple inside the rim.
9.Remove the spoke used before.
10.Place j-bend spoke on nipple.
11.Repeat steps other spokes 1 by 1.
<img src='https://www.carbonbikekits.com/upload/201905/1557804842496784.jpg' alt='https://www.carbonbikekits.com/upload/201905/1557804842496784.jpg' onLoad='resizeImage(this);' width='350' onClick='ShowFullSize(t